Sewing Blog

16 Garment-Sewing Terms You Need to Know

The more you sew, the more you’ll come upon words and phrases that make you raise an eyebrow. Basting? It has nothing to do with your Thanksgiving turkey. Grading? We’re not talking about getting an A+ on a paper.

Sewing Work Space

In this sewing glossary, we’ll walk you through some of the most common sewing terms and what they mean

You might want to bookmark or “Favorite” (click the orange heart under the title!) this post to have on hand for reference.

Basting

Basting stitches are temporary long running stitches, made by machine or hand, that hold fabric together before the final permanent stitching.

Bias  

Bias refers to the diagonal of the fabric; a cut that’s made diagonally across the crosswise and lengthwise grain of the fabric.

Clipping

When you clip fabric, you make snips in the seam allowance, up to but not through the stitching, to allow the fabric to open around curves or to lay flat.

Crossgrain

The line of fabric perpendicular to the selvage edge of the fabric.

Dart  

A dart is a folded wedge of fabric used to shape a garment, particularly over curves. 

Blue Dress Worn With Brown Belt

Ease

Ease refers to the difference in the amount of fabric in a garment compared to the wearer’s measurements. For example, a garment with a 40″ bust made to fit someone with a 38″ bust would have 2″ of positive ease. If the garment was made with a 36″ bust, it would have 2″ of negative ease.

Edge stitch 

A line of stitching very close to a seam line or garment edge. 

Facing 

A fabric piece used to create a finished edge on a garment, mirroring the edge it is sewn to and creating a enclosed edge. Typically used for necklines, edges with closures, or armholes.

French seam 

A French seam is a finished seam in which the seam is initially stitched with wrong sides together, then flipped inside and stitched right sides together. This encloses the seam allowance, creating a clean finish on the inside of the garment.

Gathering

The process of taking up a length of fabric in order to seam it to a shorter piece of fabric.

Grading 

After a seam is stitched, the two layers are trimmed to a different width in order to prevent a ridge showing on the outside of the garment seam. A second definition of Grading is the process of converting a pattern size to a larger or smaller size. 

Grain

Grain describes the direction of the warp and the weft in a woven fabric. The threads in a woven fabric are set up on a loom in a lengthwise and crosswise orientation. The lengthwise grain is used to lay out the garment pattern pieces. The crosswise grain runs from one selvage edge to the other. 

Grain line

The imaginary line running lengthwise on the fabric, always parallel to the selvage edge. The grain line is marked on pattern pieces with a straight line, usually with arrows at either end, and marked as “grain line” or “straight grain.”

Hem on Blue Dress

Hem

The finished bottom edge of a garment, usually folded up and sewn. 

Interfacing

A layer of of fabric used to stabilize the fashion fabric in a garment. Interfacing can be woven or non-woven, fusible or sew in. 

Nap 

A fabric texture that runs in a specific direction (for example, velvets and corduroys). Nap requires that all pieces be placed and cut in the same orientation. Prints that have directionality may not have a textured nap but also need care when placing pattern pieces.

Right side

The side of the fabric designed to be on the outside of the garment. Sewing directions usually instruct to put right sides together and stitch, resulting in fabric seamed together with the seam allowances on the inside of the garment. 

Seam

The line where two pieces of fabric are sewn together.

Seam allowance

The seam allowance is the distance from the edge of the cut fabric piece to the stitching, which can vary according to the pattern and fabric. 

Ironing Blue Printed Fabric

Selvage

The woven edge of a fabric that runs parallel to the lengthwise grain. When you purchase fabric, it is cut across the crosswise grain, at a 90-degree angle to the selvage. (Also spelled selvedge in the U.K.)

Stay stitch

A line of machine stitches on or near the seamline, stitched on a single layer of fabric, used to stabilize a cut edge.

Stitch length

The length of a single stitch, which affects the amount of fabric moved through the machine per stitch. Fewer stitches per inch means each stitch is longer, up to and including basting stitches. 

Topstitch 

Topstitching is a row of stitches seen on the outside of a garment. They can be decorative and also add strength and wearing ability to an item. 

Shoulder seam on blue dress

Under stitch

A row of stitching that attaches the facing to the seam allowance on the inside of the garment.

Wrong side

The side of the fabric intended to be on the inside of the garment. On some fabrics it is apparent which is the wrong or right side, such as on prints, but on other fabrics both sides can look the same. 

Yardage

A length of fabric. Patterns will indicate required yardage needed for a garment in a specific size, detailing how much yardage is needed. 

Startup Library: Sewing

Everything you need to sew with confidence.

Learn to sew with author, designer and sewing expert Sara Alm in this comprehensive beginner’s class. Get the Class

2 Comments

Nicola Webb

In Britain basting is called tacking. It was very confusing when I first moved to Canada and people were talking about basting.

Reply
Demetria

I live in the state of Georgia, United States but I’m from the state of Texas. I call it basting too! Just learned it that way. I can understand why it would be called tacking though! Makes more sense. Basting makes me think of cooking a turkey! I lived in Italy for 4 yrs, loved it, miss it!

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply