Crocheting Blog

How to Block Granny Squares So They Look Flawless

Granny squares are such a versatile crochet motif. They can be made any size, with a huge array of different colors and designs and joined together to make all kinds of projects.

How to block granny squares squares after blocking

But when you first make your granny squares, they look a little misshapen and lumpy, like this:

How to block granny squares pre blocked squares

The best solution to wonky granny squares is blocking.

Blocking a granny square neatens up the shape and gives it nice, crisp corners. It’s also useful for making sure each granny is exactly the same size, which makes joining them together a breeze. 

Classic Crochet Granny Square Class

Classic granny squares made easy

Learn one of the most iconic crochet stitches and turn it into versatile motifs and one-of-a-kind creations.Learn More

How to block a granny square

This technique works really well no matter what type of yarn and fiber content you used.

What you  need:

Step 1: Size up your granny square

How to block granny squares pre blocked squares on grid

Place the unblocked squares onto a cutting mat or graph paper with a grid. This allows you to measure the granny and to see just how square (or not!) it is. If you don’t have one, don’t worry — you can always just measure with a ruler or tape measure.

In my example above, the granny square is approximately 12 cm square. However, some of the others in my pile were slightly larger, so I decided to block all of them to be 12.5 cm (5″) square.

Step 2: Make a granny square blocking template

A template may seem fancy, but you don’t need any special tools. In this case, the template is actually just a piece of paper printed with two squares the size you want for your finished granny squares. You can easily make your own with your preferred word processor.

How to block granny squares squares on grid

You may want to print several copies of the template so that you can block all your squares at the same time. Or, if you’ll need to block a lot of squares, you could laminate the templates so they’re waterproof and reusable.

As you can see, the smallest and largest square fit within the template square.

Step 3: Pin your granny square in place

Start by pinning two opposite corners. Place each pin is within the chains of the corner and directly on the corner of the template square.

How to block granny squares squares pin corners first

Once the corners are done, use as many pins as you need to straighten out the edges of the squares.

How to block granny squares squares pin sides next

Step 4: Spritz!

Fill a small spray bottle with cold water and lightly spray the granny squares. 

After spritzing the granny squares should be just damp, not soaking wet. The paper does get fragile when wet so make sure not to move it from your blocking mat until after the blocking process is completely finished.

How to block granny squares squares spritzing

If your squares are made with acrylic yarn, or a blend of acrylic and natural fibers, just spritzing won’t give you the best results. Acrylic requires heating to set it into shape, so you need to go onto Step 5: Steaming.

If you used 100 percent natural fibers (such as wool, alpaca, cotton or silk) for your granny squares, you can spritz the squares more thoroughly and leave them pinned out to dry. This takes about 24 hours, though, so you might want to steam them as well to speed up the process.

How to block granny squares after spritzing

Step 5: Steaming (optional)

First, some important things to note:

  • Safety first! Make sure you have a heatproof mat to put your iron down safely in between steams. Take care not to touch the iron with your arm when pinning out your next squares.
  • Never touch the surface of the granny square with the plate of the iron. It will melt acrylic, ruining your granny square (and probably your iron, too). And it will scorch any squares made from natural fabrics. 
  • Do not press the granny squares as you would the pieces of a knitted garment. If you cover them with a damp cloth and then iron, this will flatten the stitches completely and will ruin the square.

It is possible to use specialist steamers, but I just use my ordinary steam iron. Put it on the highest setting and set the dial to maximum steam production.

How to block granny squares squares iron on full steam

Hold the iron carefully over the granny squares, allowing the steam to plume onto the yarn. The iron should be about 1″ above the crochet fabric. The pins are a good guide: If you start touching any of them with the base plate of the iron, you are too close.

Hold the iron in place for 15-20 seconds, moving smoothly over the granny squares. They should be warm to the touch but will cool down quickly when you take the iron away.

How to block granny squares squares steaming

Step 6: Leave to cool and dry

Allow your granny squares plenty of time to dry.

For acrylic yarn, the squares should dry quickly. For natural yarn, you’ll need to leave the squares in place at least overnight.

Once dry, remove the pins. You can see that the blocking works its magic and the granny square is looking a lot neater and is the correct size. 

How to block granny squares squares single square finishedHow to block granny squares squares after blocking
Classic Crochet Granny Square Class

Classic granny squares made easy

Learn one of the most iconic crochet stitches and turn it into versatile motifs and one-of-a-kind creations.Learn More

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply