Woodworking Blog

Table Saw Buying Guide: Shopping For the Best Table Saw For You

I’m in the market for a table saw. My current Ridgid R4512 hybrid is OK but I want to go to the next level of accuracy for my woodworking, so it’s time to consider an upgrade.

Have you shopped for a table saw and felt overwhelmed at all the choices? Let’s break down the main categories of table saws and think through other considerations to narrow down the choices into a few options.

Table saw

A table saw is a major purchase and will be the backbone of your workshop for years to come. Buying a table saw is sort of like buying a car. The saw has to do what you want it to do, be dependable, be affordable, last a long time and have all the necessary safety features. Here are a few things to consider when buying a table saw: categories of saws, needs vs. wants, space, safety and, finally, price. The photos below are all from members of the Lumberjocks woodworking forum.

Categories of saws

There are three main categories of table saws — cabinet saws, contractor saws and hybrid saws. Let’s examine each one.

Cabinet saws

Cabinet saws are designed to be beasts, with more than adequate power, maximum durability, large size and weight. They usually have 3 horsepower motors or more. They have durable cast iron parts, a large table, a heavy-duty fence and a full cabinet that totally contains the motor. They often weigh 400 – 600 pounds, so they aren’t intended to be portable. The weight is necessary to counteract the force of the strong motor and to minimize vibration.

Cabinet table saw

SawStop cabinet saw photo via Marshall Chapin

Contractor saws

Contractor saws are designed to be somewhat portable, so that a contractor could use one at a jobsite. These saws usually have a 1 3 – 4 horsepower motor, lighter weight construction for portability, a lighter duty fence and no cabinet. Contractor saws can be difficult to keep tuned if they are moved around, slung onto a truck and then dragged onto a construction site. They don’t take up much room in the shop, so they are great if you have little real estate in your shop.

Contractor table saw

Grizzly contractor saw photo via Kenny Carmody

Hybrid saws

As the name implies, hybrid saws have features of both the cabinet saw and the contractor saw. They generally have the same power motor as contractor saws. They have a partial cabinet with the motor contained, which helps with dust collection and noise dampening. They can be tuned to be very accurate, yet they are lightweight and small enough to be moved around the shop.

Hybrid table saw

Craftsman hybrid saw photo via Steven Sussman

Needs vs. wants

The next task is determining what you need to do with the saw. Be honest with yourself about how you plan to use it. Do you need to break down large sheets of plywood to build cabinets? Do you build furniture with relatively thin boards? Think about what you plan to do with the saw 80 percent of the time. If that consists of ripping hardwood less than 1” thick and occasionally cutting joinery, then a 1.75 horsepower motor in a contractor or hybrid saw is plenty adequate. However, if you regularly need to rip thick maple, then you need an industrial strength saw of 3 horsepower or more. Don’t make a purchase decision based on exceptions.

Shop space

If space is an issue in your shop (as it is in my basement shop), then some saws can be knocked off the list immediately because they just won’t fit. Saws meant to break down plywood have a wide rip capacity, which means a long table to the right of the saw and a long fence rail to go with it. That operation also requires lots of space in front of the saw and behind it. Having a contractor or hybrid on wheels can be helpful when real estate is tight.

Safety considerations

Table saws are safer than ever, but they are still inherently dangerous. One important improvement is the addition of a riving knife to help prevent kickback. Serious injury is possible with kickback. In fact, lots of people maintain kickback is more of a threat than the blade. Most saws made in the last few years will have a riving knife. Be aware that if you buy a used saw a few years old, it may not have one.

If safety is your main consideration, look no further than SawStop. Every SawStop saw has flesh detection technology that stops a fully spinning table saw blade so quickly (I’m talking milliseconds) that the user escapes with barely a scratch. If you haven’t seen the famous hotdog video, you really must check it out.


The adage “you get what you pay for” certainly applies to table saws. High-end machines have perfectly flat tables, will run forever and cut with incredible accuracy, and you pay for that quality. On the lower end, contractor saws have less cast iron and lower quality parts but can work well if you tune them properly and use a high quality saw blade. Buying a used saw, like a used car, will cut down the price but cancels any warranty. Because saws are so heavy, weighing in a 300 – 600 pounds, shipping isn’t cheap either.

Table saw detail

Shop around

A table saw is definitely an investment. Because of the expense involved and the importance to the quality and enjoyment of your woodworking, it is worth your time to shop around. Search for reviews from reliable publications, talk with fellow woodworkers and read discussions on forums.

Whether you choose a Buick or a Bugatti, buy the best saw you can afford.

Craftsy Unlimited Guilt Free Binge Watching


Tara Fields

Does anyone know where one can find reliable ratings for table saws? I recently checked good old Consumer Reports, but they didn’t rate table saws. I am in the market for a contractor style.

John Sanford

There are actually 6 categories of table saws that the consumer can get their hands on, however one, the very cheapest small superlight benchtop saw, really isn’t suitable for woodworking, and the other (European sliders) tends to be so expensive and hefty that usually only dedicated and well heeled hobbyists and pros will even consider them. Which leaves four categories. The three listed above, and the jobsite saw, which is a much better evolved version of the benchtop saw. The jobsite saw is well suited to construction, and can be used for light duty woodworking.

That said, the woodworking magazines (Wood, Fine Woodworking, Woodworker’s Journal, and others) tend to do a comparison of at least on category every year. This is pretty darn mature technology, so the market is pretty stable as far as what products are available, which means that doing a complete review of every category every year makes no sense. Many libraries will have back issues of some of the above magazines, and there is also the Fine Woodworking/Fine Homebuilding Annual Tool Issue, which frequently has a comparison review, which the library may also have.


“Consumersearch.com” did a review of the best table saws in each of several categories.

office design ideas

There’s flexibility in providing computer repair services these days. I recommend that you use Creativewood for office design ideas.

computer hard drive

Thank you, I have recently been searching for information approximately this subject for ages and yours is the best
I’ve came upon till now. However, what concerning the
bottom line? Are you certain in regards to the source?


Does anyone know how much a 1940’s Craftsman 113.1011 Table Saw that still works well is worth? It has all the attachments.

Exie Villarta

I dugg some of you post as I cerebrated they were extremely helpful extremely helpful


Hi, your post is so nice and good information of hybrid table saw .Hybrid table saw is easily use in woodworking.

Miter Table Saw

In woodworking, the term circular saw is most commonly used which is refers to handheld and electric circular saw are designed for cutting wood wit


Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply