This Is the Secret to Crocheting Flat Circles


Crocheting a flat circle seems pretty straightforward: crochet in rounds, throw in some increases and — bam! — you’ve got a circle. Except, you might have something that’s a little misshapen and not actually a circle.

The good news is this problem is totally fixable. All you need are a few rules to help guarantee you get perfect circles every time.

1. Start With the Right Number

Your first round really sets the stage for success, so make sure you have the right number of stitches from the get-go. Too many stitches and you make waves; too few and you have a bowl.

Generally, the taller the stitch, the more stitches you need in your first round. A few guidelines to keep in mind:

2. Nail the Magic Increase Formula

To make your circle grow just enough without getting too big around the edge, you need to know how many times to increase and where to increase each round. Luckily, this is the same whether you’re making a crochet circle using sc, hdc or dc stitches.

Pro Tip: You must start with the recommended number of stitches laid out above if you want this formula to work its magic.

  • Round 1: Start with the recommended number of stitches listed above.
  • Round 2: Make 2 stitches into each stitch of Round 1 (you’re increasing in every stitch).
  • Round 3: Make 2 stitches into the first stitch of the previous round, 1 stitch into the next. Repeat this pattern around (you’re increasing every other stitch).
  • Round 4: Make 2 stitches into the first stitch of the previous round, then 1 stitch into each of the next 2 stitches. Repeat this pattern around (you’re increasing every third stitch).
  • Round 5: Make 2 stitches into the first stitch, then 1 stitch into each of the next 3 stitches. Repeat this pattern around (you’re increasing every fourth stitch).

With every round, you work one more regular stitch between your increase stitches. By Round 10, for example, you’d make 8 single stitches between each increase.

Now, what does this actually look like? See below how to work a flat circle in double crochet.

Rounds 1 and 2

Crocheting a flat circle using double crochet stitches rounds 1 and 2

Start with a magic ring. Make 3 chains and 12 dc into the ring, which will give you 13 stitches in Round 1, shown on the left in the photo above.

For Round 2, make a dc into one of the dc stitches in Round 1. Work a second dc into the same stitch and complete the round making 2 dc into every stitch.

By working 2 stitches into every stitch, you’ve doubled your stitches in Round 2. You now have 26 stitches.

Rounds 3 and 4

Crocheting a flat circle using double crochet stitches rounds 3 and 4

In the photos above, the increase stitches are highlighted with green Vs and the single stitches are shown in bright pink lines. In Round 3, shown on the left, there is an increase every other stitch. In Round 4, shown on the right, there are two single stitches between each increase.

Keep Counting

An easy way to make sure you’re on track in each round is to count your stitches. Remember, you’re increasing by the same number of stitches you started with in Round 1. So, because our example started with 13 dc, each subsequent round increases by 13 stitches.

  • Round 2: 26 (13 sts from previous round + 13 sts increased)
  • Round 3: 39 (26 + 13)
  • Round 4: 52 (39 + 13)
  • Round 5: 65 (52 + 13)
  • Round 6: 78 (65 + 13)

Give Spirals a Go

There’s another method for crocheting flat circles, used primarily in amigurumi: instead of joining each round and making a complete ring, you work in an ever-growing spiral pattern. The same formula for increasing applies.

How to Fix Mistakes

Crochet a flat circle - when things go wrong

Although the above tips will give you perfect, flat circles 95 percent of the time, there’s still a chance things can go wrong. After all, your tension could be off, or you could accidentally repeat a row or forget a few increases. When that happens, you may find yourself with a wonky-looking circle. Here’s what to do in each situation.

The Potato Chip

Compared to the flat circle in the center, the one at the top right looks super ruffled — that’s the potato chip effect. This is what happens if there are too many stitches around the outside of your growing circle. In this example, rounds 1 and 2 are correct, but the others have too many increases.

If your circle shows signs of ruffling, try pulling back a couple of rounds and skip a round. For instance, you could pull back to round 4, then crochet round 6 instead of round 5 before carrying on. Because you’re skipping a set of increases, you’ll have fewer stitches and hopefully a flatter edge.

The Bowl

The example on the top left shows what happens if you complete rounds 1 and 2 correctly, but then continue without increasing at all. The sides curl up, beginning the formation of a bowl or basket. When this happens, try repeating the round you’ve just finished. So if you’re on round 5, work another round 5 before going on to round 6. Problem solved!

Reply to Beth Freestone
  • (will not be published)

7 Responses to “This Is the Secret to Crocheting Flat Circles”
  1. Trista Polo
    Trista Polo

    Very helpful thank you! The pattern I’m using is wrong! Someone in a crochet group shared your post and it helped me a lot I’m going to frog the whole thing and use this technique instead <3

  2. Elaine

    I crochet Teddy Bears & toys for homeless children and have had this problem constantly but you have solved it! Thank you sooooo much. Elaine

  3. Beth Freestone
    Beth Freestone

    Am trying to find a crochet pattern for round shell crochet in English can you help

  4. Michaela

    How is an increase done with a circle of granny stitches? I also need to know how to decrease using granny stitches, please.

  5. Katarina

    This is very, very helpful, thank you so much. Not only do I get to learn how to make perfect flat circles, but also a basket 🙂

    • Katie

      This the first time I’ve viewed Craftsy, and Hannah, your comment made me laugh out loud! I’m a beginner who hasn’t begun yet, and I’m sure my initial attempt will look like a chip, too! :o)