George Vondriska

Table Saw Essentials

George Vondriska
Sign in or Become A Member to view full class!
  • In-depth Instruction; over 101 mins
  • On-demand video access anytime
  • Bonus downloadable PDF resources
  • Access to class Q&A
Before making any cuts, let’s make certain your table saw can do everything you ask it to do. We’ll look at: • Parallelism between the blade and fence
• Getting perfectly square cuts
• Calibrating your rip fence and blade height
• Choosing the correct blade
• Ensuring your blades are sharp, clean, and ready to cut
• Taking care of your saw
Starting with safety, George will take you through how to rip boards, including when to use a push stick and how to position your hands and body. Then you’ll move on to crosscutting techniques, including a great tip for easily crosscutting wide material. Rabbets require a sacrificial fence, and resawing requires the use of a featherboard. This session shows you how to make your own sacrificial fence and how to use it, and how to safely position and use a featherboard.
Many woodworking projects call for exceptionally thin pieces, such as edge banding and splines. We’ve got a great approach that allows you to cut these small parts safely, with your guard in place. George will also show you to set perfect angles on your saw blade and miter gauge. The table saw also provides a great way to cut thin-walled non-ferrous metals. This session teaches you about the perfect blade for this work, and how to safely make the cuts.
Stackable dado heads are a must-have if you plan on doing joinery on your table saw. This session shows you how to stack the dado head so you don’t chip a tooth, a great trick for setting the height of the dado head and how to safely cut dadoes. Making a wide cut doesn’t always mean using a dado head. With proper set up, you can use a standard rip blade to cut custom-sized grooves and rabbets.
A table saw is often the centerpiece of a shop. Refining and practicing the techniques you’ll learn in this class will make you a better woodworker, and help you create more and better pieces.
This short video might help overcome any hesitation you have in working with a table saw.
Learn more about your instructor, George Vondriska.
 
 
7 Lessons
1  hrs 41  mins

Description

Whether you’re rough-cutting stock to size, taking it to its final dimensions or doing the joinery required for your woodworking project, a table saw has you covered. This class provides you with must-have information for setting up and safely using your table saw.

Instructor George Vondriska will begin by showing you how to set up your saw correctly. You’ve got to check the alignment of the blade to the miter gauge slot and the rip fence, and make sure the saw is cutting at 90 degrees. We’ll show you high- and low-tech methods for doing this setup, so you can choose the approach that works best for you.

Next, get a handle on table saw blades. Alternate top bevel, triple chip grind, flat top grind, hook angle, tooth count….what does it all mean? What differentiates a rip blade from a crosscut blade? You’ll learn exactly what you need to know to make certain you’re always putting the right blade on the saw.

When ripping, crosscutting, or cutting dadoes, you need to make sure you’re safe. This class provides you with safety rules for the table saw, and shows you where to stand, how to position your hands and how to stay out of harm’s way.

With the saw properly set up and safety techniques at your fingertips, you’re ready to get to work. We’ll teach you how to rip and crosscut, set up a stackable dado head, cut rabbets, and even how to cut non-ferrous metal; essential techniques for getting the most out of your saw.

In addition to the detailed video instruction you’ll receive, this online class provides you with some downloadable resources and helpful information to print and keep, including a detailed class guide you can use as a reminder for the key points of the class instruction; and a list of resources that will help you find the products and elements you’ll see in the class.

George Vondriska

Formally trained in technology education, George Vondriska has been teaching woodworking since 1986. He has been the managing editor of Woodworkers Guild of America since 2007. In addition to classes at his own Vondriska Woodworks School, George teaches at woodworking shows across the country and has taught woodworking for the Peace Corps, Andersen Window, Northwest Airlines and the Pentagon.

George Vondriska

Bonus materials available after purchase

Get exclusive premium content! Sign up for a membership now!