Class

Setting Up & Using Jointers & Planers

$15.00

You Save 62%

At a Glance:

In-depth Instruction; over 101 mins
On-demand video access anytime
Bonus downloadable PDF resources
Access to class Q&A

Item: W0512E

Description

Jointers and planers are similar, but not identical. Each machine has a different function, but both machines are extremely useful when it comes to creating precisely machined boards in your shop.

Additionally, buying your lumber rough sawn and doing you own jointing and planing can save you a lot of money!

In broad strokes, jointers are the perfect tool for flattening faces and creating edges that are smooth, straight and square. Planers provide two parallel faces, and guarantee that every board you machine is exactly the same thickness.

This class will help you double check your machines to make sure they’re correctly set up. This includes knife changes on both the jointer and planer, with techniques provided for perfectly setting the jointer knives. You’ll learn how to lubricate and maintain your jointer and planer for optimum performance. You’ll also learn:

• How to read wood grain for proper feed direction to avoid tear out
• Tricks for getting the jointer fence perfectly square
• Low-tech tips for setting jointer knives
• Jointer and planer safety
• What materials can and can’t be jointed and planed
• How to eliminate jointer snipe
• Safe and proper techniques for face jointing
• Using the jointer to cut rabbets
• Jointing tapers
• Levelling planer infeed and outfeed tables
• How to reduce or eliminate planer snipe
• Planing extremely thin stock
• Using your planer to clean up sawn edges

This class will help make sure you get the most out of your jointer and planer by helping you properly set the machines, and safely use them to their full potential.

Class Sessions

Setting Jointer Knives

Setting Jointer Knives

19:34

Once your jointer knives become dull they’ll need to be sharpened and replaced. When installing the new knives, they need to be set so they’re parallel to the outfeed table, and are all set at a consistent height. No fancy equipment is required for this; the work can be done with a good quality straight edge. We’ll show you how.

Setting the Jointer Table

Setting the Jointer Table

10:16

Since we’ll be setting the table using test cuts, we’ll start this session by providing you with proper jointer safety techniques. Next, you’ll learn how to perfectly set the outfeed table to eliminate snipe from your cuts, and how to calibrate the infeed table so you know exactly how much material is being removed with each pass.

Squaring the Fence and Lubricating the Bed

Squaring the Fence and Lubricating the Bed

7:19

If you want square edges on your jointed material, you’ve got to have the fence set square. We’ll start the set-up process by using a common shop tool, and double check the results by making cuts. Choice of material used for the test cuts is critical; we’ll walk you through the best choices for this.

Proper Jointer Technique

Proper Jointer Technique

21:54

You’ll get the best possible cuts on your jointer by feeding your material in the right direction, based on grain direction. In this session, you’ll learn to read the grain. We’ll also cover proper safety and techniques that should be used for:

wide pieces
narrow pieces
face jointing
cutting rabbets
jointing tapers

Benchtop Planers

Benchtop Planers

6:12

In order to get the most out of your planer it’s important to understand how it works, and how it differs from jointer. You’ll learn how to determine the shortest piece of material you can safely plane, how to clean the feed rollers, and general machine maintenance.

Set the Table

3:54

Changing knives on a benchtop planer is fairly simple, but there are tricks that will make it go better for you. There are typically A LOT of bolts holding the knives in place. You’ll see a shortcut for removing and reinstalling the bolts. When new knives go in you need to make certain there’s no debris that will interfere with the knives doing their work. Proper cleaning is critical.

Changing Knives

Changing Knives

9:39

You won’t get flat faces on your work if the infeed and outfeed tables aren’t correctly set. Leveling these tables to the planer main table is key to good quality work. It can easily be done using standard items in your shop, but it’s imperative that it’s done correctly. You’ll learn how.

Cutting Techniques

Cutting Techniques

17:36

Now that your planing is cutting cleanly and precisely, let’s look at specific planer techniques. In this final session, you’ll learn how to:

Establish the proper depth for a first planer pass
Eliminate snipe
Use the planer for edge jointing narrow pieces
Plane extremely thin stock

Bonus: More about Jointers and Planers

Bonus: More about Jointers and Planers

1:27

Learn more about the value of these helpful shop machines.

Setting up and Using Jointers and Planers Meet Your Instructor

Setting up and Using Jointers and Planers Meet Your Instructor

2:31

Learn more about your instructor.

Your Instructor

George Vondriska

Formally trained in technology education, George Vondriska has been teaching woodworking since 1986. He has been the managing editor of Woodworkers Guild of America since 2007. In addition to classes at his own Vondriska Woodworks School, George teaches at woodworking shows across the country and has taught woodworking for the Peace Corps, Andersen Window, Northwest Airlines and the Pentagon.

George Vondriska

Bonus Material

FAQs

Can I purchase a class to keep in my collection?

Yes, we do have a Shop where you can purchase classes to keep. Our Shop items are located under the Shop Tab.

How do I know what the Class covers?

Every Class has a free Preview video you can watch, to give you a flavor of the Instructor and the skills or project that will be covered. In addition, the Overview tab includes a thorough written description of the Class. And finally, each Class Session has a brief written summary of the content in that Session, including the length of each Session video. You will get a good feel for the Class content by reviewing these resources.

Do I have to be a Member of Craftsy to purchase a Class?

No you don’t. While Premium Members will receive regular offers for special deals on Craftsy content, Classes are not reserved exclusively for Members. If you buy a Class as a non-member, we’re sure you’d also enjoy having access to our full library of great projects and articles as a Member, so give it a try.

How do I purchase a Class?

First you should decide that the Class is what you want. Review the Class Preview video and the various written descriptions of the Class and each Session before you purchase, so you have a good understanding of the Class content. When you’re ready to purchase and gain access to the Class, simply click the “Add to Cart” button, and proceed through the Checkout process.

How do I access/view my Class?

Once you’ve paid, you can access/view your Class by going to the MY ACCOUNT section of Craftsy. The MY ACCOUNT link is in the upper right-hand area of the website. Within your MY ACCOUNT, a section labeled “My Content” is where the class you purchased will appear, including a link to watch the video of your Class. You’ll also receive an email confirmation after your purchase, which will include a link to view your Class. You can access your Class as many times as you wish, and you’ll never lose access to your Account information. Just be sure to “Log In” for access to MY ACCOUNT.

Do I have to take the Class right away?

No. Any Class you buy will be accessible to you always. You can view your Class whenever you want, and you can view individual Sessions in whatever order you like.

Is there a limit on the times I can view my Class?

No. Your access never expires. You can view any Class you purchase as many times as you want, whenever you want.

Can I view a Class on my tablet device or mobile phone?

No problem. Most newer-model smartphones or other mobile/tablet devices with an internet connection are able to play the Class videos. Simply Log In to Craftsy, and you can view any Class you’ve bought through the MY ACCOUNT section. Or, you can click on the “View Class” link within the email confirmation you’ll receive upon your purchase.

How do I get access to the Bonus Materials for the Class?

Until you purchase a Class, the Bonus material (any extra videos, download materials, etc.) will not be accessible. Once you purchase a Class, and go to view your Class, each individual Bonus element is accessible by simply clicking on each item. You’ll find the Bonus Materials directly below your main Class viewer frame. You can access the bonus materials as many times as you like and/or save them to your device.

How does the Class Q&A Resource benefit work?

Once you purchase any Class, within the Class viewing page, you’ll have access to post a question, comment or tip in the Class Discussions. This is not a “live chat,” but Craftsy contributors will answer posted questions and provide tips regularly. You can also view other Class participants’ questions and input to take part in this virtual dialogue among others who have taken the Class and are willing to share tips, answers, or ideas.

Can I print out Class details?

For any Bonus Material that is a PDF Download, yes you can. Just click on the icon/button for the Bonus element you want and print with your local printer.

What are PDF downloads?

These are simply documents, plans, or written materials that are formatted in a way to print out and retain for reference. By simply clicking on the icon/link for any PDF Download that is included with a Class, you can print that document on your own printer or simply view the contents on your computer/mobile device.

Are there any system requirements to view the Class video content?

Your Class video content is best when viewed on a computer manufactured in the past couple of years with a good broadband Internet connection (not dialup). We also highly recommend using the latest version of Firefox, Safari, or Chrome as your Internet Browser, though recent versions of Internet Explorer will work as well. The recommended screen resolution is 1024 x 768 or larger.

Why do you need my email?

We need it to acknowledge your purchase of a Class, and send you a confirmation of your transaction. Also, to maintain your permanent access to the Class videos, you’ll need to Log In to craftsy.com. We guarantee that we will not share your email with any third parties. You may receive email updates from Craftsy from time to time, with details of new Classes and updates. You can easily unsubscribe when you receive any email.

Can I get a refund if I don’t like the Class?

Because you’ll have full access to all the materials and content that is presented in the Class immediately, we can’t offer a refund after purchase. Please review the Class Preview video and the various written descriptions of the Class and each Session before you purchase, so you have a good understanding of the Class content.

How do I contact Craftsy?

If your question is about the Class content, please use the Contact Us Link – and you'll receive feedback from the Class Instructor. Even your fellow Class participants may jump in to offer tips and advice from their experience. If you have other questions or need help, you can email us at craftsy@program-director.net or call us toll-free, at 1-888-891-7203 . Customer Service Representatives will be available Monday-Friday, from 8:00 AM to 4:30 PM Central time, excluding normal holidays.

Explore Classes by George Vondriska

You may be interested in