Create an eye-catching and deceptively simple multi-axis vessel! Get the chips flying with professional woodturner and instructor Michael Roper as you master offset measuring and learn how to safely turn a spindle. Michael will walk you through mounting your second axis, showing you how to make air cuts and secure your vessel into a four-jaw chuck. Then, use a Forstner drill bit to remove wood in the center of your piece and carefully shape the neck. Learn expert hollowing techniques, such as how to use a straight cutter for bulk material removal. Next, find out how to use a bent cutter to clean up the shoulder, and make a caliber to test for wall thickness to avoid punching through! Finally, work with your lathe to create a reverse jam chuck and finish your elegant piece by blending cuts and sanding your vessel for a smooth-as-silk result. You’ll even find out how to create a round-bottom variation of this remarkable vessel.
Class Sessions
Introduction & Getting Started
13:49
Meet your instructor, Michael Roper, and get started making your own vessel with an offset opening. First, Michael will show you how to measure for center and how to create an offset, which you'll use when hollowing out your vessel. Then he'll demonstrate how to round the blank and make the first shaping cuts, offering tips about tools and lathe speeds along the way.
Mounting the Second Axis
9:20
Learn how to mount your vessel on its offset axis and create an off-axis tenon, which will be used later to stabilize your vessel as you hollow it out. Gain confidence as you master the tricky air cut, and learn how to measure and dovetail the tenon to snugly fit into a four-jaw chuck. Finally, Michael shares safety tips and advice for securely mounting your vessel into the chuck.
Beginning to Hollow
16:56
Create a hollowing channel using a drill bit, then start on the dramatic architectural feature of the vessel neck. Learn how to properly prepare your tools and gently make cuts so you take just a little wood off at a time. Finally, Michael introduces you to a tool that will cut down on your sanding time by removing large tool marks immediately.
Hollowing Techniques
13:05
Discover which tools give you the best results for hollowing and then go inside the vessel as you hollow out the bulk. Then, Michael will show you how to use a bent cutter to create your vessel walls and offer you invaluable tips for approaching the wall with confidence. Learn a simple trick for making a homemade caliper to help you measure your wall thickness so that you never break through.
Creating a Reverse Jam Chuck
17:03
Now that the top of your vessel has been created, it's time to focus on the bottom. And for that, you'll need to make a reverse jam chuck, which you can customize to accommodate the neck of your piece. Learn how to measure and mark your blank for a precise fit. Then, Michael shows you time-saving techniques for hollowing out the top of your chuck. Finally, see how to make your final chuck cuts and attach your vessel for a snug fit.
Finishing Your Vessel
17:28
Make the final cuts on your vessel as you shape the bottom, learning to taper your piece to just a 1-inch circumference. Blend your cuts and sand the piece while it's still on the lathe. Learn Michael's technique for ensuring the vessel sits flat before you make the final cut of this class, this one by hand, as you remove the nub with a chisel.
Round Bottom Variation
16:31
Stretch your multi-axis skills and artistic vision even further as you discover how a few simple technique adjustments will allow you to create a smaller vessel with a rounded bottom. You'll get advice on how to measure, shape and cut your vessel and how to alter your methods on this shorter piece. Once your shaping is complete, Michael shows you an easy way to secure your vessel to the reverse jam chuck so that you can create a perfectly round bottom while the piece is still spinning.
Your Instructor
Michael Roper
Michael Roper is a professional woodturner and woodturning instructor, as well as a third-generation carpenter. When hes not teaching woodturning classes in the Fine Woodworking Program at Red Rocks Community College, Michael leads workshops, demonstrations and a variety of other classes throughout the Denver, Colorado, area. Additionally, his work has been featured in Woodturning Magazine and American Woodturner.
Bonus Material
Multi-Axis Woodturning: Creating a Vessel
Bonus Materials available for download after purchase.
FAQs
Can I purchase a class to keep in my collection?
Yes, we do have a Shop where you can purchase classes to keep. Our Shop items are located under the Shop Tab.
How do I know what the Class covers?
Every Class has a free Preview video you can watch, to give you a flavor of the Instructor and the skills or project that will be covered. In addition, the Overview tab includes a thorough written description of the Class. And finally, each Class Session has a brief written summary of the content in that Session, including the length of each Session video. You will get a good feel for the Class content by reviewing these resources.
Do I have to be a Member of Craftsy to purchase a Class?
No you don’t. While Premium Members will receive regular offers for special deals on Craftsy content, Classes are not reserved exclusively for Members. If you buy a Class as a non-member, we’re sure you’d also enjoy having access to our full library of great projects and articles as a Member, so give it a try.
How do I purchase a Class?
First you should decide that the Class is what you want. Review the Class Preview video and the various written descriptions of the Class and each Session before you purchase, so you have a good understanding of the Class content. When you’re ready to purchase and gain access to the Class, simply click the “Add to Cart” button, and proceed through the Checkout process.
How do I access/view my Class?
Once you’ve paid, you can access/view your Class by going to the MY ACCOUNT section of Craftsy. The MY ACCOUNT link is in the upper right-hand area of the website. Within your MY ACCOUNT, a section labeled “My Content” is where the class you purchased will appear, including a link to watch the video of your Class. You’ll also receive an email confirmation after your purchase, which will include a link to view your Class. You can access your Class as many times as you wish, and you’ll never lose access to your Account information. Just be sure to “Log In” for access to MY ACCOUNT.
Do I have to take the Class right away?
No. Any Class you buy will be accessible to you always. You can view your Class whenever you want, and you can view individual Sessions in whatever order you like.
Is there a limit on the times I can view my Class?
No. Your access never expires. You can view any Class you purchase as many times as you want, whenever you want.
Can I view a Class on my tablet device or mobile phone?
No problem. Most newer-model smartphones or other mobile/tablet devices with an internet connection are able to play the Class videos. Simply Log In to Craftsy, and you can view any Class you’ve bought through the MY ACCOUNT section. Or, you can click on the “View Class” link within the email confirmation you’ll receive upon your purchase.
How do I get access to the Bonus Materials for the Class?
Until you purchase a Class, the Bonus material (any extra videos, download materials, etc.) will not be accessible. Once you purchase a Class, and go to view your Class, each individual Bonus element is accessible by simply clicking on each item. You’ll find the Bonus Materials directly below your main Class viewer frame. You can access the bonus materials as many times as you like and/or save them to your device.
How does the Class Q&A Resource benefit work?
Once you purchase any Class, within the Class viewing page, you’ll have access to post a question, comment or tip in the Class Discussions. This is not a “live chat,” but Craftsy contributors will answer posted questions and provide tips regularly. You can also view other Class participants’ questions and input to take part in this virtual dialogue among others who have taken the Class and are willing to share tips, answers, or ideas.
Can I print out Class details?
For any Bonus Material that is a PDF Download, yes you can. Just click on the icon/button for the Bonus element you want and print with your local printer.
What are PDF downloads?
These are simply documents, plans, or written materials that are formatted in a way to print out and retain for reference. By simply clicking on the icon/link for any PDF Download that is included with a Class, you can print that document on your own printer or simply view the contents on your computer/mobile device.
Are there any system requirements to view the Class video content?
Your Class video content is best when viewed on a computer manufactured in the past couple of years with a good broadband Internet connection (not dialup). We also highly recommend using the latest version of Firefox, Safari, or Chrome as your Internet Browser, though recent versions of Internet Explorer will work as well. The recommended screen resolution is 1024 x 768 or larger.
Why do you need my email?
We need it to acknowledge your purchase of a Class, and send you a confirmation of your transaction. Also, to maintain your permanent access to the Class videos, you’ll need to Log In to craftsy.com. We guarantee that we will not share your email with any third parties. You may receive email updates from Craftsy from time to time, with details of new Classes and updates. You can easily unsubscribe when you receive any email.
Can I get a refund if I don’t like the Class?
Because you’ll have full access to all the materials and content that is presented in the Class immediately, we can’t offer a refund after purchase. Please review the Class Preview video and the various written descriptions of the Class and each Session before you purchase, so you have a good understanding of the Class content.
How do I contact Craftsy?
If your question is about the Class content, please use the Contact Us Link – and you'll receive feedback from the Class Instructor. Even your fellow Class participants may jump in to offer tips and advice from their experience. If you have other questions or need help, you can email us at craftsy@program-director.net or call us toll-free, at 1-888-891-7203 . Customer Service Representatives will be available Monday-Friday, from 8:00 AM to 4:30 PM Central time, excluding normal holidays.
Explore Classes by Michael Roper
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
You may be interested in
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This site uses cookies, web beacons, pixels, tags, and related technologies, as described in our privacy policy and cookie notice, for purposes that may include website operation, analytics, optimizing a user's experience, and third-party advertising or marketing purposes. These technologies may automatically collect and share with third parties information about your use of this site, such as when you access a webpage or complete a purchase on our site. By clicking "GOT IT", you understand and agree to our use of these technologies.