Hand Embroidery Supplies: Choosing Needles and Floss

Are you new to hand embroidery and have no idea how to choose the supplies you need to begin? I, too, once stood at the fabric store wondering which needles and thread were appropriate. Don’t worry! Here’s a quick guide to help you pick the right needles and floss for your stitching adventure.

choosing needles and floss

Needles

Depending on the style of hand embroidery, fabric and floss you’ll be using, the right needle will make or break (literally) your design. It is important to choose a good quality needle, the better the needle, the easier and more beautiful it will be for your finished embroidery project. Some of the less expensive or lower quality needles can bend or break as they are being used, which results in a crooked or completely damaged embroidery project. There are three types of needles usually used for embellishing fabric: embroidery (also referred to as crewel), chenille and tapestry. Shown from left to right in the photo below.

embroidery needles

Embroidery needles are the thinner of the three, usually long with a very sharp point in order to move easily through embroidery appropriate fabric (muslin, cotton, linen, or osnaburg). Embroidery needles usually have a large enough eye that can easily be threaded with your floss of choice. Chenille needles have sharp points, as well, but have a larger eye and thicker form than embroidery needles. They work well on the same fabrics as embroidery needles. Tapestry needles have a large eye, but a blunt point that works well with canvas work or counted cross-stitch on aida fabric.

All three needles come in a range of sizes where the higher the number, the thinner or smaller the needle. Depending on the size of floss being used, the correct size needle can be used to create the appropriate stitch and leave a minimum size hole once you move the needle through the fabric.

Floss

Embroidery floss is available in cotton, silk, satin, silk or Pearl (perle) cotton.

embroidery floss

The most common floss used for hand embroidery is 6-strand cotton. The strands can be divided according to how fine you want your finished embroidery piece to look. The less strands used, the more fine the finished design will appear.

6-strand embroidery floss 6-strand embroidery floss

Pearl cotton, unlike 6-strand cotton floss, cannot be divided. Similar to the sizing for needles, pearl cotton comes in a range of sizes with the higher number making for a thinner or finer size.

pearl cotton embroidery floss

If the embroidery design you are creating calls for thin or fine floss, you will want to use a thinner needle in order to ensure a large space or hole is not created as you move the needle through the fabric. For 6-strand or thicker ply floss, you will want to use a larger needle to pull the thread through the fabric accordingly.

When preparing for an embroidery project, I try to make sure to cut the floss the length of my forearm (from my fingertips to my elbow). This prevents twisting or knotting of the floss as I stitch. If the floss becomes fluffy or dull looking, I recommend switching to a fresh piece of floss.

I recommend testing out needles and floss size before beginning an embroidery project. This allows you to get a feel for the needle as you work, and allows you to see which floss ply works best for your project. I always find its best to experiment in order to determine which supplies work best.

Now that you have the right supplies, learn the basics of hand embroidery and designing your own patterns so you can stitch truly custom treasures for your home, your wardrobe and your friends! Enroll in Design It, Stitch It: Hand Embroidery today.

Which needles and floss are you hoping to try first?

Reply to Tasharar
  • (will not be published)

4 Responses to “Hand Embroidery Supplies: Choosing Needles and Floss”
  1. Tasharar
    Tasharar

    I’ve just purchased the CBT E-mail Extractor for my Airport Shuttle Buses business but I can’t find the tutorials for the email extractor. I remember that someone on here mentioned that they have also used this software. Thanks in advance.

    Reply
  2. Nyla
    Nyla

    Wanting to learn to embroider letters, names quotes on to tee shirts or sweaters. How do I start, what needle, thread to use. What size hoop? Thank u Nyla

    Reply
    • LAURA
      LAURA

      I’ve worked on knits a bit, for a t-shirt you’ll likely find thin interfacing a boon to stabilize your work, it’ll keep the material from stretching too much while you put in the finer details of the lettering. Personally, I’ve never used larger than an 8″ hoop, with 6-7″ being my preferred. You may find with the interfacing you can work with a larger hoop depending on the size/shape of your design. For a sweater, perhaps look more towards crewel embroidery for inspiration depending on the texture of the knit, crewel had a rougher yarn-like thread, unlike the glossy cotton floss. Not saying a cotton floss wouldn’t work, but I just don’t know for sure. You may have to experiment and find a style you like!

      Reply