What was your source for this sewing project? Online Photo or Website Name of website or photo Vogue V2827 Link to website or photo www.ebay.com/itm/VOGUE-Pattern-V2827-NY-Collection-UNCUT-Sizes-6-8-10-18-20-22-OOP-/110768545366 What are you most proud of? The custom fit and the simple fact that I successfully sewed a garment made out of leather! It was a daunting thing to contemplate but having done it, I'm not intimidated anymore. What advice would you give someone starting this project? Make your pattern out of a similar weight fabric before you attempt making it out of leather. I made this pattern up two different times, tweaking the fit each time. When I finally got around to making it out of leather it fit wonderfully when I finished. Also, invest in a Teflon presser foot. I used a leather sewing needle but have since learned that if your leather is a lighter, fabric-weight variety, a regular sewing needle is advisable because the holes won't be so big and the leather is less likely to rip and tear. Many people that sew with leather swear by gluing seams before sewing but I didn't do this. I used flange clips (for clipping together thick documents) to hold everything together then just pinched these off as I went. Go slowly and take breaks. Consider using 3m fabric tape to hold the zipper in place as you sew. This works well. See cutting suggestions above. For finishing, after sewing the lining shoulder and side seams together, I sewed the bottom edge of the sleeves, the jacket bottom edge, along the inside front zipper edges, and the lining neck edge to the leather, (right sides together), first, then inverted the lining and sewed the lining armholes (sleeves to jacket) together by hand, avoiding any loose hanging lining edges. This worked really well and made for clean lines inside and out.