Tumbler Flag Wall Hanging

Project Description

What was your source for this quilting project? Online Photo or Website Name of website or photo MSQC tutorial Link to website or photo What are you most proud of? I used a decorative stitch instead of stitch in the ditch for quilting. What advice would you give someone starting this project? I used a template to cut out the pieces from 5" square scraps.

What you will need

  • Red
  • white
  • and blue scraps.

Q&A with Arlene C

sewed1927100007697983984 asked:
How can I obtain the pattern thank you
Arlene C answered:
I'm sorry I couldn't get the tutorial to come up, but this is so easy. All you need is a variety of red, white and blue scraps, cut them into squares (I used 5x5"). Then either use a wedge template, or make your own. Sew the wedges into strips, then sew the strips together. On the top and bottom rows, I just trimmed off the peaks to make a straight edge. To make a wedge template, take a 5" square, mark 1" from the edge on two corners, and draw a line from the mark to the opposite corner on the same side.