Knitting Blog

Oh-So-Easy Colorwork: Latvian Braid Tutorial

There are plenty of ways to add a pretty braid to your knitting, whether it’s with cables, I-cords, or some other technique. But one braid technique that’s often forgotten is the Latvian braid.

Knitting a Latvian braid

What is a Latvian braid?

The Latvian braid uses a simple technique of strategically crossing two colors of yarn consistently either under or over one another as you alternate purling each color. It’s much easier than stranded colorwork, because you don’t have to worry about floats or twisting and untwisting the two colors.

Latvian Braid Hat Knitting Pattern

Latvia Braid Hat pattern via Craftsy member Black Iris

Where to use the Lativan braid

Latvian braids can be used on practically any project. Here in the Latvian Braid Hat pictured above, the braid serves as a separator between the body of the hat and the ribbed edging.

The braid also looks pretty as a border on necklines, sleeves, sweater hems, and any other edges. You can even use it as a separator between different types of stitches.

If you want a more low-key braid, you can even use two strands of the same color to keep the texture but only use one color of yarn.

Let’s take a look at the oh-so-simple way you can create this braid in your own projects.

Latvian braid tutorial

This braid leans to the right. (See instructions for a braid that leans to the left at the bottom of the tutorial.)

Latvian braid pattern

Use this abbreviated pattern to add a Latvian braid to your work. If you need more detail, keep reading for a full photo tutorial.

MC = Main Color (I used Cloudborn Superwash Highland Worsted in Shaela Heather)
BC = Braid Color (I used Sprightly Acrylic Wool Worsted in Misty Purple)

Round 1: *K1 with MC, K1 with BC; repeat from * to end of round.
Round 2: With MC and BC in the front, *P1 with MC, bring BC under MC, purl 1 with BC, bring MC under BC; repeat from * to end of round.
Round 3: *P1 with MC, bring BC over MC, P1 with MC, bring BC over MC; repeat from * to end of round.

Let’s take a look at the instructions in detail.

Knitting a Latvian braid on the needles

I’m starting with a few rounds of stitches already on my circular needles, and I’m going to add the braid. I recommend you do the same for practice.

Round 1:

Knitting a Latvian braid close up on needles

For Round 1, knit 1 stitch with MC, then knit 1 stitch with BC. Continue around, alternating MC with BC. This round just sets up the braid.

Round 2:

Knitting a Latvian braid two knitting needles

For Round 2, bring both working yarns to the front of the work. Purl 1 stitch with MC, then bring BC under MC and hold onto BC. 

Knitting a Latvian braid two knitting needles

Purl 1 stitch with BC. Bring MC under BC, and hold onto MC.

Repeat these steps around until you reach the end of the round. You’re alternating MC and BC, and just bringing the next color under the previous color as you work your way around.

Knitting a Latvian braid

As you work, you’ll notice that the yarns are twisting around each other. This might be annoying for colorwork knitters who like to keep their strands untangled, but don’t be tempted to untwist those stitches! We’ll take care of that in Round 3 without any extra effort.

close up of a Latvian braid

Here’s what your braid will look like at the end of Round 2. You can already see half of the braid forming, leaning to the right.

Round 3:

Knitting a Latvian braid needles

For Round 3, do the exact same thing you did for Round 2 except you’re going to cross the yarns over each other instead of under. Purl 1 stitch with MC, then bring BC over MC.

Knitting a Latvian braid needles

Purl 1 stitch with MC, then bring MC over BC.

Repeat these steps around. As you work, you’ll notice you’re untwisting the yarns. Yay!

Knitting a Latvian braid progress

Once you complete Round 3, you can continue knitting. Alternately, if this is your edging, you can just bind off.

Knitting a left-leaning Latvia Braid

If you want your braid to lean to the left instead of the right, all you need to do is change how you cross the yarns. So anytime the instructions say to cross under, you’ll cross over. When the instructions say to cross over, you’ll cross under. In other words, you’re just swapping Rounds 2 and 3.

Are you going to use the Latvian braid in any of your projects? Tell us your plan in the comments!

7 Comments

Zen Knitter

Thank you for this tutorial! I can see this as a beautiful addition to a collar and sleeve accents for top down sweaters in my que.

Reply
Lilly

I am familiar with this braid having done it a few times, but still found this tutorial confusing. Photos do not clearly show what is happening at all – especially with the instruction to cross yarn is part of the instruction for the previous stitch. Also, Contrast Colour (CC) is the term easily recognisable by knitters. Reading through I had to remind myself what BC was especially as the braid is 2-colour.

Reply
Marsha Witten

I guess we all have different experiences. This tutorial is the only one I’ve read on the topic of Latvian Braids that I’ve been able to follow successfully. Thanks for taking the time to write it, and to provide so much detail in the photos.

Reply
Karen

I love how this looks, but do the instructions change if you’re working on a flat piece? What about vertical braids? I’m envisioning a beautiful reversible blanket!

Reply
Jan

I’ve never knitted this braid before but I found the photos to be excellent. I was able to immediately understand how the braid is made without even reading the text. Guess I’m a visual learner.

Reply
Sarah Turnbull

What is the cast-on used on the grey and purple sample? It looks interesting 🙂

Reply
Carolyn

Latvian braid in the round – knitting in the round spirals up, the braid’s two ends do not meet without an upward jog on the right end. Is there a way to have them approximate closer?

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply