This item is a digitized embroidery design for a buyer who owns an embroidery sewing machine. You must have an embroidery machine and a method to transfer files to your machine to use this design. The design is a Tree of Life bounded by a circle. There is a large size and a small size. You will receive this design to fit a 4 inch x 4 inch (100mm x 100mm) hoop. The large design is 96mm wide and 95mm tall (about 4in x 4in) with about 8,500 stitches in the design. The design uses one thread color (shown here: green, reddish brown, and white). Stitch it in any color you desire! The small size is 38mm wide and 38mm tall (about 1.5in x 1.5in) with about 3,500 stitches in one thread color. Formats available: PES = Brother/Babylock/Bernina PEC = Brother/Babylock/Bernina VIP = Husqvarna Viking/Pfaff HUS = Husqvarna JEF = Janome SEW = Janome (NOTE THAT ".ART" FORMAT IS NOT AVAILABLE) Resizing of my designs is not recommended and PLEASE NOTE that I am not responsible for the quality of the design if you edit it in any way. I am happy to discuss modifications to the design.. just contact me! All my designs have been tested, but if you have any problems or questions, you may feel free to contact me for corrections or support. You have my permission to sew my designs on finished products to make a profit, but you may NOT resell, give away, trade, copy or reproduce the actual digitized designs. Files CAN NOT be shared or forwarded to your sewing and embroidery buddies. Be honest! SIZING / FINISHED MEASUREMENTS The large design is 96mm wide and 95mm tall (about 4in x 4in) with about 8,500 stitches in the design. The small size is 38mm wide and 38mm tall (about 1.5in x 1.5in) with about 3,500 stitches in one thread color.