christenl254497 on

place card holders

+ Add a Project

Offer some kudos...

Join the conversation...

Ask a question...

Add your comment...

Here are some details about my project:
Category Other
christenl254497 on

What materials did you use? ~3/4" diameter Dowel rods- you will need to cut them with a saw to 2.5," 3," and 4" in height ~hot glue- cool temp makes it much easier b/c you need to handle the pieces as you glue ~hemp twine ~fine sand paper to round the cut edges

christenl254497 on

What advice would you give someone starting this project? This is a very easy project. The only real difficulty is cutting the wood. It can be difficult to find a wood supply store that will cut the dowels to the correct sizes, so you need to cut them yourself.

christenl254497 on