This tutorial will show you how to make yourself a beautiful bangle, using two holes stones and wire. You should be familiar with wrapping, because that operation will steal most of your time during the process. A few measurements here and there and nice bangles will come out, in various colors of the used stones. 66 very clear pictures spread along 15 main steps will make you eager to begin working on it.
MATERIAL LIST: 70 cm of 1mm silver plated wire; 6.5-7 m of 0.315 mm silver plated wire (wrapping wire), depending on the distance between stone's holes; 5 pieces of two holes stones
TOOL LIST: round nose pliers; flat nose pliers; wire cutter; wire scissors; something round about 18 mm in diameter (a permanent marker, for instance); something thinner than a marker (a pen)
ALTERNATIVE MATERIALS: One can use any stones at hand, with two holes, either rectangular, or square shapes. If they seem to be heavy, use 3 or 4 of them, not 5. The silver plated wire can be replaced with copper or any craft wire at hand.