How to Make Classic Hoop Earrings That’ll Never Go Out of Style

Classic hoop earrings are a wardrobe staple that will never go out of style. They’re an easy way to upgrade almost any outfit, and they also make wonderful gifts. Best of all, they are really quite simple to make. In this tutorial, I’ll show you how to make a wire-wrapped hoop. Once you acquire this essential jewelry making skill, the options for customization are truly endless!

A Pair of Handmade Wire Hoop Earrings

How to make a wire-wrapped hoop

Tools you’ll need:

  • Round-nose pliers
  • Flat-nose pliers
  • Needle-nose pliers
  • About 12″ of wire (I’m using 16 gauge 14/20 rose gold filled round wire.)
  • 2 ear hooks
  • Something round to form your pieces on. (I’m using a large round mandrel, but feel free to get creative; baseball bats work great, as do wooden dowels for a more economical option.)
  • A file (Not mandatory, but just a little extra detail that will help make your piece look finished.)

Step 1:

Begin by measuring your wire. This pair will be slightly larger than 6″ each. I’ve found that these are a great everyday size for lots of folks, but if you know that you like your pieces smaller, you could go for a 4.5″-5″ pair. Cut them both at the same time so you’re sure to have consistent sizing at the end.

Measuring Wire for Jewelry Making

Step 2:

If you’ve used wire cutters, you’ll probably have crimped ends. These will end up being smack dab in the middle of the finished piece and, for the detail-oriented, can be quite an eyesore. You’re going this far, why not finish the ends? Just grab your file and flatten the ends. Then, when wire ends meet, you’ll have a nice clean connection.

Wire for Jewelry Making

Step 3:

Likely, your wire will have been spooled when you purchased it and this is one of those rare moments when that actually works to your advantage. Note what direction the curve swoops and imagine that being the inner diameter of your hoop. Hold it in your hands so it swoops upward and to the right. Now, using your needle-nose pliers, make a small circle backwards so it ends perpendicular to your original curve. You’ll want this to be large enough for the other end of your wire to fit through but not too large that it’ll look sloppy when finished.

Making Wire Hoops

Step 4:

Find the general center of your wire and line that up with the mandrel or round object you’ll be using. It doesn’t need to be perfectly center but it’ll help you in the long run if it’s closer than not. You’ll want to choose the depth of the curve you want at this point. If you form your hoop around the larger part of the mandrel, you’ll have a wider, more circular shape. Whereas, a smaller form will create an elongated teardrop shape.

Wrapping Wire on a Mandrel

Step 5:

Put gentle pressure on both sides of the wire as you begin to shape it around your mandrel. Moderate is key here — if you push way too hard that can lead to some misshaping. Best not to have to fix silly problems in the long run. Go slow and you’ll make make fewer mistakes until you get the hang of it.

Making Wire Earrings

Step 6:

As the two ends begin to meet one another, press a tiny bit harder on the end with no loop. Just enough so it will just barely fit into the hole on the other side. You want to make this fit as soon as you can so that you don’t get extra bending in your wire.

Wire Wrapped Around a Mandrel

Finished Wire Hoop

Step 7:

Using your needle-nose pliers, form a small circle (as close to the same size as your original one), so the filed end meets the neck of the teardrop.

Step 8:

Use your flat-nosed pliers to adjust any parts that may have gotten a little wonky. There you have it, you’re finished your first hoop!

Wire Hoop Earring

Step 9:

Repeat Steps 1-9, making sure that you use the same spot on your mandrel and pliers so you’ll have a matching pair. Attach ear wires and you’re all set!

A Pair of Handmade Wire Hoop Earrings

Have fun playing around with different shapes of wire or types of metal. Square wire is one of my favorites and 14K gold fill is an all-around crowd-pleaser, but you might want to try craft wire or copper until you’ve got this nailed.

In future posts, we’ll show you more ways to customize these simple hoops.

Free Online Jewelry Making Class

wirework jewelry

Learn wirework essentials & make three stunning pieces of jewelry.Enroll FREE Now »



Hello, thanks so much for the tutorial. I’m actually trying to buy the wire for this and I’m wondering if it matters whether or not I get 16 gauge “dead soft,” or “half hard” wire or what. Thank you.


Aloha Abby!
I would recommend half hard. This allows you to work with the wire and have it hold its shape better in the long run. Dead soft forms super easy but bends out of shape super easy too… You should consider hardening any wire you work with to help it maintain its shape before you are done. This can be done by tapping it with a hammer or other ways. I would do some google searches to familiarize yourself with the types of wire when you have some time. When in doubt half hard is usually a good bet ✿◠‿◠ Maggie


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>