Sweet Feet: Tennis Shoe Makeover

Posted by on Oct 9, 2013 in Embroidery | Comments


While looking through some baby photos dated from 1965, I noticed some interesting charms that looked like tiny bells on baby shoes. I asked my mother-in-law about them, and she told me they were gadgets that kept toddlers’ shoelaces from coming untied. That was the inspiration behind these sweet embroidery embellished white tennis shoes.

Kids Shoes with Adornment

While it’s very difficult to embroider on shoes, you can still transform an ordinary pair of sneakers into something sweet by adding some pretty buttons and a little lace trim.

Materials needed:

Directions:

Black Tennis Shoes without Laces

Step 1:

Remove the shoelaces from the purchased shoes.

Scissors Cutting Seam Allowance

Step 2:

Completely remove the seam allowance from Victorian trim. Machine set up: 75 needle, 60wt white cotton thread, bridging stitch or small zigzag, and an edge joining foot.

Machine Sewing Trim to Bias

Step 3:

Place the spaghetti bias on one side of the flange of your edge joining foot and the Victorian trim on the other side. Using a bridging stitch or a small zigzag (L=2mm, W=2mm) to join the Victorian trim to the spaghetti bias. You may need to adjust your stitch length and width.

Turning Under Bias

Step 4:

Turn under a scant ¼ inch on one end of the bias trim.

Adding to Shoe

Trimming and Turning Bias and Trim

Step 5:

Starting at one side of the shoe, place a small amount of Fabri-Tac along the seam of the shoe. Work in 1″ increments. Align the folded edge of trim to the toe seam at the sole. Press into place. Run another inch of glue and continue adhering the trim along the toe seam. When you get to the other side of your shoe, cut the trim so you have a scant ¼” to turn under, making sure that you end at the base of the sole.

Repeat for second shoe.

Allow to dry for about 30 min.

Step 6:

Embroider two Button~Ups Ladybug monograms on 3″ grosgrain ribbon. Make 1 1/2″ ponytail buttons, using 1 1/2″ Button~Ups Fabric Button Cover Machine or plain sew on buttons from a traditional covered button kit. Thread one monogrammed button onto the spaghetti bias.

Finished Tennis Shoes with Adornment

And that’s all there is to it!

If you like this idea, you might also enjoy my embroidered ribbon switch flops tutorial.

Will you try this fun and easy project?

Comments

  1. Kim Peck says:

    Hope you are so talented, thank you so much for the tip and tricks of embrodering! I recently seen you in Birmingham and look forward to seeing you in Huntsville soon!

    1. Hope Yoder says:

      Glad you like the post. Have fun making your shoes and thanks for the kind words.