Setting in Sleeves in Knitting: 5 Simple Steps

Posted by on Oct 22, 2013 in Knitting | Comments


I know the phrase “Sleeves are knit separately and set in” can scare a lot of knitters away from a pattern. While setting in sleeves in knitting can be intimidating at first, the process in not really all that hard. Your first set-in sleeve is like many new knitting techniques: once you understand the knitting magic behind it, it makes perfect sense.

In this tutorial I’m going to walk you through setting in a sleeve to show you just how easy it can be!

Set-in sleeves can be knit a few ways: cuff to shoulder or shoulder to cuff, the arm can be knit flat or in the round. For this sweater we have a sleeve that was knit flat and will set it into an armhole that was created by knitting the body in the round and seaming the shoulder.

Knit Sleeves for a Sweater - Setting in Sleeves

Before beginning I always reccomend blocking all your sweater pieces. This just helps everything lay nicer and makes it easier to see your stitches.

Step 1:

Line up the center of the sleeve shoulder with the center of the sweater shoulder. I use a locking stitch marker to join these two spots so I can keep track it.

Step 2:

Align your sleeve cap with the armhole from shoulder to the center of the underarm. Again, locking stitch markers can keep everything lined up.

Measuring Sleeve Cap - Setting in Sleeves

Step 3:

Measure a piece of yarn approximately three times the circumference of the armhole. Begin at the center of the shoulder and thread half the yarn through. Begin seaming here from the shoulder to the underarm.

Working on Underarm - Setting in Sleeves

Step 4:

Work all the way to the center of the underarm.

Repeating on Other Side - Setting in Sleeves

Step 5:

Repeat for the other side.

Finishing Setting Sleeve - Setting in Sleeves

It’s really that easy!

Here are a few more tips for setting in your sleeves:

  • Generally, when working the stitches seam one for one when they are the same direction.
  • Sleeve caps are not always designed to fit perfectly into the armhole. Rather than matching up the cap to the armhole stitch for stitch, pin it into place so that the fabric sets in evenly without puckering.
  • When seaming vertical and horizontal stitches work approximately 2 stitch for every 3 row stitches.
  • If you notice too many extra stitches on one side, skip one or two when seaming.
  • Block your pieces before setting in and after setting in.
Finished Sweater - Setting in Sleeves

I love finishing because it’s what really makes your handknit look tailored and sharp.

A great Craftsy class to check out is Seaming Handknits with Chris Bylsma. This will really help you refine your finishing techniques and you may even be introduced to a few new techniques you haven’t tried before.

Have you set in a sleeve yet? How did it turn out and do you have any tips to make the process easier?

Comments

  1. peach_cam0 says:

    I LOVE locking stitch markers! Mush easier to work with than safety pins, no snagging. Keeps everything lined up nicely.